Wavy Lines Rug Neutral 200 x 300cm

Our Wavy Lines Rug in Neutral employs an all-over knotted technique to create its richly tactile surface. Crafted from 100% wool yarns, larger knots are used to decorate the piece with four, wavy stripes which move their way across the length of the rug in a subtly darker hue.

This minimal design in neutral tones has an all-over contemporary feel and is designed to be layered over your hard flooring to create a comforting softness underfoot as well as an added layer of warmth.  

Care Instructions

Rugs should be cleaned weekly, using a vacuum on a low to medium power setting. Always move the vacuum in the direction of the fibres. Do not apply too much pressure or use a vacuum with teeth or rotating brushes as these may damage the fibres.

Some light shedding and fluffing is normal with new rugs, the excess pile can be removed using a vacuum on a low to medium power setting. Do not apply too much pressure or use a vacuum with teeth or rotating brushes as these may damage the fibres.

We recommend using a non-slip base under rugs to reduce movement and dust retention.

Loose threads are not a fault and should not be pulled. Loose threads can be removed carefully using scissors, taking special care to cut the thread only, not a loop in the rug.

Exposure to sunlight and repeated friction at certain points can affect the surface colour and overall wear. We recommend rotating rugs from time to time, to ensure the rug wears evenly and any colour fade caused by exposure to direct sunlight is even across the surface.

Small spillages and marks should be cleaned immediately and not left to dry to reduce the risk of stains. We recommend using a clean, absorbent, undyed cloth and a gentle dabbing motion to absorb any spillages. For solid stains, a blunt object such as a spoon should be used to remove as much debris as possible. If necessary, a solution of lukewarm water with a couple of drops of mild, colourless dish soap can be dabbed onto the affected area using a clean, undyed cloth. After cleaning, use a dry, absorbent undyed cloth to remove excess water from the surface.

When using a damp cloth, we advise starting from the outer edge and working toward the centre of the spillage to avoid creating ring marks.

If necessary, a specialist cleaning product can be used. We strongly advise following manufacturer instructions and testing on a small inconspicuous area.

Do not rub vigorously and where possible avoid excessive spot cleaning.

Professional dry cleaning is recommended for marks or stains. We do not recommend excessive dry cleaning.